// //
Etisalat Support

Please Note

Etisalat customer care number is 101 or 800101. Du customer care number for fixed home service is 043905555. I am not related to Etisalat and Du, blog was prepared with the help of Internet resources.

Report cyber abuse, fraud call, blackmail on al almeen 8004888

Need information about Du Home Services ? Click Here

Etisalat PNP 803/850 router setup - Advance

Etisalat PNP 803/850 router setup - Advance

Etisalat PnP router is configurable remotely as it is connected to Etisalat ACS (automatic configuration server). Any new Etisalat PnP enable router will collect the configuration from ACS and connect to Internet if account is in ready condition.

In this blog you will be able to configure Etisalat PnP router in case you have to manually configure the router from your side.

Below is the basic option:

1. Connect cat6 wire to your device and router LAN port.

A) Login

1. Open web browser (like Chrome, IE) and type the ip address 192.168.1.1




2. Login to the router using username admin and password admin (in some router the login details is provided in a sticker, check bottom of the router or manual) and press Enter button. Etisalat 850 model will not work with same setup. You must look at the bottom of the router for login details.


B) Configure Internet settings

1. In next page, click Advance







2. The next page will be as below




3. Click on Operation Mode in Left page. The operation mode should be Gateway. Apply the settings (or leave the default with GATEWAY selected)




4. Go to TCP/IP Settings then WAN Interface to configure the internet



5. Select PPPoE in WAN ACCESS TYPE. Provide Internet username and password as given by Etisalat. Select Continuous in CONNECTION TYPE. Click Apply Changes


The router will save it's settings and restart. The globe icon in the router will become green if the WAN port is connected in proper ONT port - Usually ETH1 in the ONT


Leave the TCP/IP Settings for LAN as default. No changes is required for LAN setup.



C) Configure wifi.
1. Click Wireless on left page

  • Click BandMode
  • Choose the 2.4Ghz/5Ghz Concurrent Mode
  • Click on Apply Changes






2. Configure 2.4Ghz

  • Click on Wlan2 (2.4Ghz)
  • Click on Basic Settings
  • Give Wifi name on SSID field
  • Click on Apply Changes button
  • Your wifi will restart with newly applied settings


  • Click on Wlan2 (2.4Ghz)
  • Click on Security
  • Select WPA2 in Encryption option
  • Select Personal (Pre-Shared key) in Authentication Mode
  • Select AES in WPA2 Cipher Suite
  • Select Passphrase in Shared Key format
  • Type the wifi password in Pre-Shared Key field
  • Click on Apply Changes button
  • Your wifi will restart with newly applied settings









    3. Configure 5Ghz

    (similar to 2.4GHz setup)
    • Click on Wlan1 (5 Ghz)
    • Click on Basic Settings
    • Give Wifi name on SSID field
    • Click on Apply Changes button
    • Your wifi will restart with newly applied settings
    • Click on Wlan1 (5 Ghz)
    • Click on Security
    • Select WPA2 in Encryption option
    • Select Personal (Pre-Shared key) in Authentication Mode
    • Select AES in WPA2 Cipher Suite
    • Select Passphrase in Shared Key format
    • Type the wifi password in Pre-Shared Key field
    • Click on Apply Changes button
    • Your wifi will restart with newly applied settings

    Check your wifi on your wifi device and Internet as well


    Please visit below link to go through the Basic option

    Basic setup

    http://etisalatsupport.blogspot.com/2017/12/etisalat-dir-803-850-router-basic-setup.html

    Thank you