gEQ12 v2.2.0 WiN

Team R2R | April 12 2019 | 3.7 MB


gEQ12 is 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Today’s mixing and mastering processes require a full featured but easy to use equalizer which can accurately shape the tone of a track , bus or master track. eEQ12 provides all necessary tools in one package paired with some unique features. The display shows the spectrum curve of incoming and outgoing signal. gEQ12 has the unique feature that the outgoing spectrum is directly calculated from incoming spectrum (incoming spectrum – filter curve = outgoing spectrum). This allows you to capture the incoming signal, to freeze it and to modify then the filter curve based on the altered outgoing spectrum. The filter response is controlled by 12 individual filter bands. Each filter band has its own display handle, which can be adjusted by mouse.

gEQ12 consists of 12 stereo filter in series. Each filter can be configured individually by setting type, stereo placement (all, left/mid and right/side), slope, frequency, gain and q-factor. gEQ12 offers 9 analog modeled and 8 digital (Butterworth) filter. The filter quality can be increased by using oversampling. This ensures “analog” filter magnitude/phase response near Nyquist frequency. On top of it gEQ12 can operate in several minimum or linear phase modes, which can lower CPU usage and makes filter phase response linear.



  • 12 independent filter bands, extended frequency range 10Hz – 48kHz
  • 17 filter types, analog/digital design, zero delay IIR
  • filter slope up to 96dB
  • independent stereo/left/right/mid/side processing per band
  • 7 processing modes: zero latency, minimum/linear phase
  • stereo/MS processing (e.g. stereo/mono split)
  • sample rates up to 192 kHz
  • “real” over sampling, up to 4x
  • hi-res spectrum analyzer with 32k FFT based ISO R40 frequencies
  • pre/post-EQ, average/live spectrum, stereo/left/right/mid/side
  • narrow-band sweeping mode
  • spectrum freeze mode
  • very easy alignment of filter response curve to audio spectrum
  • sample exact A/B toggle for all processing modes
  • precise parameter input
  • large and easy to use GUI
  • interactive spectrum/EQ display
  • full DAW automation support, smooth filter frequency change
  • 64-bit internal processing
  • very efficient CPU usage design


v2.2.0:– Filter Solo
– GUI corrections
(Note: this version is not compatible with previous versions. Before installation of new version, please rename previous version of the plug-in to “gEQ12_old”)

INFO/DEMO/BUY: http://mage.si/hCmc
gEQ12 v2.2.0 AAX RTAS VST3 VST WiN-R2R


dEQ6 v2.1.2 WiN

Team R2R | April 12 2019 | 3.7 MB


dEQ6, a 6 band stereo/MS dynamic equalizer with high quality oversampling and accurate spectrum analyzer.

dEQ6 offers following features:

  • 6 independent filter + compressor/expander
  • 3 filter types, analogue design, minimal phase, zero delay
  • many comfort functions to setup multiple bands
  • stereo/MS processing
  • side chain support
  • sample rates up to 192 kHz
  • “real” over sampling, up to 4x
  • hi-res spectrum analyzer with 32k FFT, ISO R40 based
  • pre/post-EQ, average/live spectrum, stereo/left/right/mid/side
  • narrow-band sweeping mode
  • spectrum freeze mode
  • very easy alignment of filter response curve to audio spectrum
  • precise parameter input
  • large and easy to use GUI
  • interactive spectrum/EQ display
  • 64-bit internal processing
  • very efficient CPU usage design


System Requirements:
– Windows XP or newer
– Win: 32/64 Bit VST, 32/64 Bit VST3, 32 Bit RTAS, 32/64 Bit AAX
– Tested with: Cockos Reaper, Steinberg Cubase/Nuendo/Wavelab 6/7/8, ProTools 10/12

– Filter Meter: shift/ctrl for slow/fast threshold change

INFO/DEMO/BUY: http://mage.si/YEyp
dEQ6 v2.1.2 AAX RTAS VST3 VST x86 x64 WiN-R2R


Impress v1.9.15 WiN

Team R2R | April 12 2019 | 3.6 MB


Impress is a wideband stereo compressor including side-chaining, various prefilter options and state-of-the-art over sampling. The goal of the design was to cover a broad range of compression applications in today’s mixing and mastering situations with strong focus on low aliasing. So, Impress could be used to shape subtle a snare sound, glue different tracks on instrument bus and even do complex tasks like deessing or voice over’s.

-Zero latency click-free 64-bit internal processing
-Low aliasing compressor design
-“real” oversampling, up to 8x
-Stereo/left/right/mid/side processing
-External side-chain
-Main signal multiband filter, up to 192 dB/Oct (Linkwitz-Riley design)
-Detector signal prefilter, up to 192 dB/Oct
-2 compressor modes: classic and clean (low aliasing)
-3 gain stage modes: modern, vintage and vintage clean (including thermal noise emulation)
-2 level detection modes: peak and RMS
-Short/long attack/release times
-Low aliasing soft knee
-Limit gain reduction
-Flexible signal monitoring

– Presets: preset manager updated
– GUI: performance improved
– Mono plug in available

– Presets: new preset manager, xml based

– AAX/RTAS: Fixed crash due to incorrect PDC initialization

INFO/DEMO/BUY: http://mage.si/jD0B
Impress v1.9.15 AAX VST VST3 RTAS x86 x64 WiN-R2R


DynaRide v1.1.4 WiN

Team R2R | April 12 2019 | 4.7 MB

(Win32/64; AAX*, RTAS, VST3, VST)

DynaRide is an advanced gain rider plug-in with multiple detector programs and switchable pre-delay. On top of it DynaRide can enhance the output signal by limiting the riding process to specific audio signals like speech, vocal and bass.

Ride Control
DynaRide offers several detector modes designed for special tasks like dialog, vocal or bass riding. Additionally the riding process can be enhanced by limiting the riding process to specific audio signals like speech, vocal and bass.

Ride Insight
With the VU/Gain meter, you can visually control the gain riding process.

•Adjustable attack and release
•Advanced signal detector including programs for vocal, speech and bass
•Vocal, speech and bass enhancer
•Switchable pre-delay
•VU meter for input/output signal and gain
•Gain can be written as automation envelope
•Preset management
•Large and easy to use GUI
•64-bit internal processing.

– Presets: preset manager updated
– Mono plug in available

– Presets: new preset manager, xml based

– AAX/RTAS: Fixed crash due to incorrect PDC initialization

INFO/DEMO/BUY: http://mage.si/5KRr
DynaRide v1.1.4 AAX RTAS VST VST3 x86 x64 WiN-R2R


AMM v1.0.2 WiN

Team R2R | April 12 2019 | 3.3 MB


AMM is a 32to2 channel automatic microphone mixer. It offers several advanced mix modes and extensive controls for each channel. AMM can be used to mix quickly a discussion round, a dialog with several speakers or even an audio conference with up to 16 microphones to a stereo signal. AMM supports multiple channel configurations, from mono up to 16 stereo channels, depending on the DAW capabilities.

AMM mixes automatically 16 stereo channels into one stereo out channel, depending on the mixing modes and channel strength. AMM controls the envelope of the channel strength with the parameter Attack, Hold and Release.

– 16 internal stereo channels
– internal mixing or external mixing with sender/receiver mode
– speech pre filter
– switchable pre-delay
– envelope controlled channel strength
– noise gate
– mix modes: normal, auto, auto balanced, prio
– moderator mode
– extensive channel controls like mono, trim, bypass, weight, mute, solo and pan
– input/output metering
– write channel strength as automation data to DAW
– click-free 64-bit internal processing
– Large and easy to use GUI

– AAX stability improved

– AAX multichannel fix
– Manual updated

INFO/DEMO/BUY: http://mage.si/sQku
AMM v1.0.2 WiN-R2R



Team R2R | 10 Apr 2019 | 8.1 MB


Essential Reverb

SUBSPACE is a super-lush sounding and totally streamlined reverb plugin features just two controls: a switch that selects one of four presets, and a dry-wet control. Adding (inter-)stellar reverb to your sound was never easy.

INFO/DEMO/BUY: http://mage.si/ZV01


LoFi Vintage Clipper v1.0.3 WiN

Team R2R | 10 Apr 2019 | 9.0 MB


LoFi Vintage Clipper plugin is design to add grit and weight to your mix with two distinctive custom designed saturation algorithms.  Use it to add presence and density to your tracks and control transients like the biggest Mix Engineers! This is a fine tuned clip algorithm designed to limit the transients as happens using a real analogue signal chain and increase the density of your tracks.  Saturation is a special designed algorithm that mimics the behavior of vintage analog equipments like old tape machines and mixing console input/output stage

INFO/DEMO/BUY: http://mage.si/rawp
LoFi Vintage Clipper v1.0.3 WiN-R2R


Marquis Compressor v2.1 WiN MAC

Team R2R | 10 Apr 2019 | WiN: 8.1 MB | OSX: 25.0 MB

AU / AAX / VST / VST3 / x86 / x64

Marquis Compressor is a “universal” compressor AAX, AU and VST plugin for professional music production applications. You’ll find a very smooth compression performance in this compressor, coupled with a harmonically-rich sound, both suitable for mixing and mastering. Being “universal” this compressor can be used on a wide range of sound material: individual tracks, stems and mixes, producing “clean” or “colored” sound.

Marquis Compressor plugin was built around a tube triode-modeled amplifier cascade. At low Drive settings this cascade produces a mild harmonic coloration while at higher Drive settings you can get a brutal tube saturation which works great for drums, bass and vocals. At moderate Drive settings this cascade can add a pleasant grit to the mix.

Marquis Compressor features a unique “round” signal level detection algorithm, which creates a very open, punchy, compressed sound with an impressive transient response. Beside this, Marquis Compressor offers a classic feedback (opto) compression mode switchable to a more common feed-forward compression.

Marquis Compressor carries 3 distinctive compression algorithms, one of them (T3) being modeled after a classic analog compressor. The Gate algorithm is also available which is handy at reducing drum bleed in drum tracks.

•Track compressor
•Mastering compressor
•Compressor with a “character”
•Stereo, mid-side, 5.1 surround compressor
•Side-chain compressor
•Gate/downward expander
•Harmonic exciter/saturator

Version 2.1:
– Added “V.Soft” drive mode for minimal coloration.
– Added Retina support on macOS, and automatic high-resolution UI size adjustment on Windows.
– 25% lower CPU usage on AVX2-capable processors (in 64-bit mode).

INFO/DEMO/BUY: http://mage.si/KsbR
Marquis Compressor v2.1 AU AAX VST VST3 WiN MAC-R2R


TB All Plugins Bundle v1.2.5 WiN MAC

Team R2R | 09.04.2019 | OSX: 29.9 MB | WiN: 20.1 MB


Scientifically sound: Our audio plugins are based on more than a decade of scientific research and product development in the areas of digital signal processing and auditory perception. Simply advanced: We combine advanced signal processing techniques and highly-optimized cross-platform implementations with simple-to-use interfaces to optimize your workflow. Value for money: We strive for both affordability as well as quality rather than settling for compromises and trade-offs, introducing professional-grade products to a broad range of users.



  • Barricade
  • BusCompressor
  • Compressor
  • DeEsser
  • Dither
  • EBUCompact
  • EBULoudness
  • Equalizer
  • Evoke
  • Ferox
  • FlX
  • Gate
  • Isone
  • Module
  • Morphit
  • ReelBus
  • Reverb
  • Sibalance
  • TimeMachine
  • VoicePitcher


Chanqelog v1.2.5:
– Windows plugins
32 bit plugins included in installer (with exception of Pro Tools AAX plugins which require a 64-bit host)
– Enhancer v1.0.0
First release of our intelligent, triple-band enhancer plugin
– Equalizer v4.1.4
Added crosshair functionality when hovering equaliser editor
Added visual indication for sections that are dynamic or have an external side chain
Added visual indication of both static and dynamic contributions for dynamic EQ sections
Added 4th, 6th and 8th order analog flat-top filters
Added 4th, 6th and 8th order analog low-shelving filters with resonance
Added 4th, 6th and 8th order analog high-shelving filters with resonance
Various enhancements and stability improvements
– Morphit v1.3.3
New headphone profiles: Sony WH1000XM3, Meze 99 classic, NAD Viso HP50, Koss Pro 4aa, Senheiser HD800s, Sony MDR XV950B1, Sony MDR XV950N1, AKG N60NC, Dolby Dimension
– Barricade v4.2.6
Various enhancements and stability improvements
– ReelBus v4.0.6
Various enhancements and stability improvements
– Reverb v4.1.3
Various enhancements and stability improvements

INFO/DEMO/BUY: http://mage.si/6Vm1
TB All Plugins Bundle v1.2.5 WiN MAC-R2R


SideMinder v1.1.0 WiN MAC

SYNTHiC4TE | April 07 2019 | 6.7 MB

SideMinder is a dynamic stereo width enhancer that can increase the width of a stereo track, bus and/or master mix WITHOUT risking polarity inversion. SideMinder “listens” to the stereo material using lookahead FIR correlation detectors and dynamically narrows the stereo image precisely if/when negative correlation begins to occur.  Since the stereo width is only narrowed when it needs to be an overall increase in stereo width can be applied that remains MONO COMPATIBLE. This effect cannot be obtained using typical “mid/side” compression techniques nor does SideMinder alter the overall dynamics of the signal (SideMinder is a “differential limiter” not a dynamic range limiter).  Additionally, by seeing and hearing what SideMinder is doing to the signal one can make better choices when mixing and mastering to produce the best sounding result when played on any system.

SideMinder’s width enhancer section includes a “Bass Mono” control that narrows the stereo image below the selected cutoff frequency. This control helps to center the bass and provides a more solid feel to the sound.

This is a very important feature when mastering for vinyl. When the SideMinder processing is bypassed the Output Correlation meter remains active for visual indication of the effect of the plugin before/after processing.

SideMinder is a 64-bit plugin. 64-bit VST2 and VST3 formats for PC and “universal binary” VST2, VST3 and AU formats for Mac OS 10.7+ with installation and use instructions

SideMinder plugin (now v1.1.0).
– The update includes a couple of bug fixes for Cubase and an even more transparent width limiting action plus limiting closer to “0” correlation for even wider mixes

INFO/DEMO/BUY: http://mage.si/ZRZE
SideMinder v1.1.0 WiN MAC RETAiL-SYNTHiC4TE


Please, rate your DAW

Other polls...